Palm Pre User Manual

Section 2A: Basics 39
Basics
Charge the Battery
Although the battery may come with a sufficient charge to complete the setup process, we
recommend that after setup you charge your phone until the battery icon in the upper-right
corner of the screen is full to ensure that the battery is fully charged.
See “Maximizing Battery Life” on page 41 for tips on making your battery’s power last longer.
1. On the right side of your phone, open the charger/microUSB connector. (This is easier
to do if you slide the keyboard out first.)
WARNING
Use only batteries and chargers that are approved by Sprint and Palm with
your phone. Failure to use a battery or charger approved by Sprint and Palm
may increase the risk that your phone will overheat, catch fire, or explode,
resulting in serious bodily injury, death, or property damage. Use of
unapproved third-party power supply accessories may damage the device
and void the Limited Warranty for the product.

Palm Pre Specifications

General

Display diagonal	3.1 \
Display resolution	320 x 480 pixels
Ringer type	Polyphonic
Internal memory	8192 MB
Rear camera type	Single camera
Text prediction system type	T9
Multimedia Messaging Service (MMS)	Multimedia Messaging Service (MMS) is a standard way to send messages that include multimedia content to and from a mobile phone over a cellular network
FM radio	No
Operating system installed	Palm OS
Form factor	Slider
Product color	Black
Talk time (2G)	5 h
Standby time (2G)	300 h
Data network	3G
Bluetooth version	2.1+EDR
Personal info management (PIM)	Alarm clock, Calculator, Calendar, Notes

Weight and Dimensions

Depth	16.95 mm
Width	59.5 mm
Height	100.5 mm
Weight	135 g