346 Section 5A: Regulatory and Safety Information
Radio Frequency (RF) Safety Exposure
General statement on Radio Frequency (RF) energy: Your phone contains a transmitter and a
receiver. When it is ON, it receives and transmits RF energy. When you communicate with
your phone, the system handling your call controls the power level at which your phone
transmits.
Specific Absorption Rate (SAR): Your mobile device is a radio transmitter and receiver. It is
designed not to exceed the limits for exposure to radio waves recommended by international
guidelines. These guidelines were developed by the independent scientific organization
ICNIRP and include safety margins designed to assure the protection of all persons,
regardless of age and health.
In order to certify this unit for sale to the public, this unit has been tested for RF exposure
compliance at a qualified test laboratory and found to comply with the regulations regarding
exposure to RF Energy under the recommendations of the International Commission on
Non-Ionizing Radiation Protection (ICNIRP). The tests are preformed in positions and
locations as required by the FCC and IC for each model.
As SAR is measured utilizing the device’s highest transmitting power, the actual SAR of this
device while operating is typically below that indicated below. This is due to automatic
changes to the power level of the device to ensure it only uses the minimum power required
to communicate with the network.
The SAR limit for mobile devices set by FCC/IC is 1.6 W/kg averaged over 1 gram of tissue for
the body or head (4.0 W/kg averaged over 10 grams of tissue for the extremities - hands,
wrists, ankles, and feet).
The highest reported SAR values of the Palm
®
Pre™ phone are:
Maximum 1g SAR values (W/kg) FCC
Head 0.919
Body 0.936
To Next Page
Loading...
Need help?
General
Weight and Dimensions
