292 Section 3C: Your Connections to the Web and Wireless Devices
1. Open
Bluetooth .
2. Make sure Bluetooth is on (see “Turn the Bluetooth Feature On/Off” on page 291).
3. Tap Add device and tap the device name on the list of available Bluetooth devices.
4. If a passkey is not required, pairing is complete when the Devices list appears. (If a
passkey is required, tap Yes, allow.)
5. Do one of the following:
䡲 An automatically generated passkey appears on the passkey screen: Check the
other device screen to verify that the passkey is correct, and tap Yes, connect to
connect.
䡲 The screen displays a passkey generated by your phone: Enter the displayed
passkey on the other device.
䡲 The screen prompts you to enter a passkey: Check the documentation that came
with the other device to see if there’s a required passkey. (If so, enter that passkey on
your phone. If not, make up a passkey and enter it on both devices.)
Tip
You can also open the Bluetooth app by opening the connection menu,
tapping Bluetooth, and tapping Bluetooth Preferences.
To Next Page
Loading...
