Chapter 20 Performing HotSync
®
Operations
288
3. Click the Local tab.
4. In the Serial port drop-down box, select the virtual serial port you chose or
created in step 1.
5. Click OK.
To prepare your Mac computer for a Bluetooth HotSync operation:
1. Double-click the HotSync Manager icon in the Palm folder.
2. In the HotSync Controls tab, select Enabled.
3. Click the Connection Settings tab, and select the On check box next to
bluetooth-pda-sync-port.
4. Close the HotSync Software Setup window.
Select the port from the
drop-down list
Shown with Mac OS X
To Next Page
Loading...
