Palm Tungsten T3 Handbook

Network Preferences
333
4. Repeat steps 2 and 3 until the login script is complete.
5. Tap OK .
Creating plug-in applications
You can create plug-in applications containing script commands that extend the
functionality of the built-in script commands. A plug-in application is a standard
PRC application that you install on your handheld just like any other application.
After you install the plug-in application, you can use the new script commands in
a login script.
Plug-in applications have the following characteristics:
■ Written in C language
■ Compiled into a device executable
■ Called properly from a login script
■ Able to return control to a login script after it terminates
■ Created with the use of a development environment that supports Palm OS
software, such as Metrowerks CodeWarrior for Palm™ Platform
For additional information on creating plug-in applications, send e-mail to Palm
Developer Support at
devsupp@palm.com
.
Deleting a network service profile
There is only one way to delete a network service profile: Use the Delete command
from the Service menu.
To delete a network service profile:
1. From the Communications Preferences list, select Network.
2. Tap the Service pick list.
3. Select the network service profile you want to delete.
4. Tap the Menu icon .
5. Select Delete from the Service menu.
6. Tap OK .
7. Tap Done.
Prompt
Opens a dialog box and prompts you to enter certain text (for
example, a password or a security code).
End
Identifies the last line in the login script.

Palm Tungsten T3 Specifications

General

Brand	Palm
Model	Tungsten T3
Category	Handhelds
Language	English