Palm Tungsten T3 Handbook

Conducting Bluetooth HotSync operations
287
Performing a modem HotSync operation
After you prepare your computer and your handheld and select your Conduit
Setup options, you are ready to perform a modem HotSync operation.
To perform a modem HotSync operation:
1. Tap the Home icon .
2. Select the HotSync icon .
3. Tap the Modem icon to dial the Palm Desktop modem and synchronize the
applications.
4. Wait for the HotSync operation to complete. If you have any problems
conducting a successful HotSync operation, see “HotSync problems” in
Appendix B.
Conducting Bluetooth HotSync operations
If you have a Bluetooth computer running Windows 98/Me/NT/2000 or
Mac OS X, version 10.1.2 or later with the Apple Bluetooth software, you can use
Bluetooth technology to perform wireless HotSync operations.
NOTE
Go to the web site www.palm.com/support for additional information on
compatibility with other versions of the Windows operating system.
Preparing your computer for a Bluetooth HotSync operation
There are a few steps you must perform to prepare your computer for a Bluetooth
HotSync operation.
To prepare your Windows computer for a Bluetooth HotSync operation:
1. Use the Bluetooth setup software on your computer to open or create a virtual
serial port for Bluetooth communication. See the documentation included with
your computer for instructions on changing port settings or configuring the
Bluetooth serial host.
2. Click the HotSync Manager icon in the Windows system tray, and then select
Setup.
Click the HotSync Manager icon

Palm Tungsten T3 Specifications

General

Brand	Palm
Model	Tungsten T3
Category	Handhelds
Language	English