Palm Tungsten T3 Handbook

Chapter 19 Using World Clock
266
7. Select the day of the week when daylight saving begins within the selected
week.
8. Tap OK .
9. Tap the End box and repeat steps 3 through 8 to select when daylight saving
ends.
10. Tap OK.
Modifying a location
You can edit the location information.
To modify a location:
1. Tap a Location pick list.
2. Select Edit List.
3. Select the location you want to modify.
4. Tap Edit.
5. Adjust the settings. See “Adding a location” earlier in this chapter for details.
6. Tap OK .
7. Tap Done.
Removing a location
You cannot remove a location that is currently assigned to the primary location.
To remove a location:
1. Tap a Location pick list.
2. Select Edit List.
3. Select the location you want to remove.
4. Tap Remov e.
5. Tap OK to confirm the deletion.
6. Tap Done.

Palm Tungsten T3 Specifications

General

Brand	Palm
Model	Tungsten T3
Category	Handhelds
Language	English