Network Preferences
329
You can do this only if you have previously created a standard connection with
your phone. For instructions on creating a standard connection, see “Setting up a
phone connection” in Chapter 12.
Adding detailed information to a network service profile
If you are using one of the predefined network service profiles, you probably need
to enter only your username, password, and telephone number. If you are creating
a new network service profile, you may need to provide additional information to
your ISP or dial-in server. You use the Details dialog box to add more information
to a selected network service profile.
To add connection details:
1. From the Communications Preferences list, select Network.
2. Tap the service field.
3. Tap Details.
Idle timeout
The Idle timeout setting defines how long your handheld waits before dropping
the connection with your ISP or dial-in server when you switch out of a TCP/IP
application.
To set the Idle timeout:
1. Tap the Idle timeout pick list and select one of the following options:
2. Tap OK .
1 minute
Waits one minute for you to open another application before it
drops the connection.
2 minutes
Waits two minutes.
3 minutes
Waits three minutes.
Never
Keeps your PPP or SLIP connection until you turn off your
handheld (or until it times out).
To Next Page
Loading...
Need help?
General
