Panasonic AG-CPD20P - Format

122
123
Format
The format of the service log is as shown below.
<TS>UTC 2008-11-22 00:48:09</TS><LV>N</LV><OP>Power On</OP>
<TS>2008-11-22 09:48:12</TS><LV>N</LV><OP>System Start AG-CPD20 4.xx.xxx.0 ABCD123456 usa</OP>
<TS>2008-11-22 09:48:23</TS><LV>N</LV><OP>Slot Close</OP>
<TS>2008-11-22 09:48:27</TS><LV>N</LV><OP>Card Slot1 PA-SV16G (CLASS6) 15814656 15814560 1//88//2080763F//7B
</OP>
<TS>2008-11-22 09:48:27</TS><LV>N</LV><OP>Card Slot2 NO CARD</OP>
<TS>2008-11-22 09:48:27</TS><LV>N</LV><OP>Card Slot3 NO CARD</OP>
<TS>2008-11-22 09:48:27</TS><LV>N</LV><OP>Card Slot4 NO CARD</OP>
<TS>2008-11-22 10:23:45</TS><LV>N</LV><OP>Rec File GPIO1 slot1 data/20081122/102345.av</OP>
<TS>2008-11-22 11:07:32</TS><LV>N</LV><OP>Rec Stop STOP</OP>
<TS>2008-11-22 12:13:30</TS><LV>N</LV><OP>System End Acc</OP>
<TS>2008-11-22 12:13:35</TS><LV>N</LV><OP>System End</OP>
<TS>2008-11-22 12:13:37</TS><LV>N</LV><OP>Power Off</OP>
<TS> (Time Stamp): The local time is automatically added upon obtaining other user log. However, the times for the Power
On log, upgrading without displaying menu during start-up, and initializing to the factory default settings
during start-up are the UTC times.
Service Log
(continued)