Panasonic AG-CPD20P - PATROL Mode Settings; Setting PATROL Mode Shutter Speed; Setting PATROL Mode Camera Zoom

50
51
Viewing Live Video
(continued)
RETURN MENU
CONTROL PANEL
ON/
OFF
Cursor button
MENU button
Setting shutter speed (in PATROL mode)
Set a shutter speed to capture sharp video of fast-moving
subjects.
This menu is available only when [Init LPR Mode] in
administrator setup is set to “ENABLE” and [LPR Mode] is
set to “PATROL”.
Note:
This menu is available only when the [CAMERA 1] connector
input is selected.
1. Press the [MENU] button.
The Menu appears.
2. Confirm that [Camera1] is selected, and press
the [ ] button.
Confirm
3. Press the [
,
] buttons to select [Patrol
Shutter Speed].
The appears.
Select
4. Press the [
,
] buttons to select a shutter
speed.
Select
AUTO:
Automatically adjusts the shutter speed to
ambient light.
1/100, 1/500, 1/1000: Set as required by the subject.
Setting camera zoom (in PATROL mode)
The camera zoom can be set in the range 1.0 to 22.0 x.
This menu is available only when [Init LPR Mode] in
administrator setup is set to “ENABLE” and [LPR Mode] is
set to “PATROL”.
Note:
This menu is available only when the [CAMERA 1] connector
input is selected.
1. Press the [MENU] button.
The Menu appears.
2. Confirm that [Camera1] is selected, and press
the [ ] button.
Confirm
3. Use the [
,
] buttons to select [Patrol Zoom].
The appears.
Select
4. Press the [ ] button to raise the ratio.
Raise the ratio.
Press the [ ] button to lower the ratio.
Lower the ratio.