Panasonic AG-CPD20P - To Turn off the [REC] Lamp During Recording

62
Recording
(continued)
RETURN MENU
CONTROL PANEL
ON/
OFF
Cursor button
MENU button
To turn off the [REC] lamp during
recording
The [REC] lamp on the camera connected to the [CAMERA 1]
connector lights during recording. The following steps allow
you to keep this lamp off at all times.
1. Press the [MENU] button.
The Menu appears.
2. Press the [
,
] buttons to select [Setup/Info]
and press the [ ] buttons to confirm the entry.
Confirm
Select
3. Press the [
,
] buttons to select [Camera1
Rec LED].
select
Note:
If “Camera1” has not be set for any of Preset1, Preset2, and
Preset 3 on the Video Allocation screen in Administrator
setup, [Camera1 Rec LED] cannot be selected.
4. Press the [
,
] buttons to select “OFF”.
select
The lamp will now remain off at all times.