Panasonic AG-CPD20P - Setting Target Speed for Recording; Configuring Target Speed Trigger

60
61
Recording
(continued)
RETURN MENU
CONTROL PANEL
ON/
OFF
Cursor button
MENU button
Setting the target speed
If the target speed detected with the radar gun exceeds the
value set here, it is used as a record trigger.
1. Press the [MENU] button.
The Menu appears.
2. Press the [
,
] buttons to select [Setup/Info]
and press the [ ] button to confirm the entry.
Confirm
Select
3. Press the [
,
] buttons to select [Target
Speed].
Select
4. Press the [
,
] buttons to set the speed.
Setting values: OFF, 1, 2, ..., 200
Select
Notes:
[Target Speed] may not be selected due to the settings on
the Trigger screen in Administrator setup.
Set Connection Of Radar on the Radar/GPS screen in
Administrator setup to “Recorder”.
•
•