Panasonic AG-CPD20P - Rebooting the Recorder; Procedure for Rebooting

76
Rebooting This Unit
Should the operating status of the recorder become
unstable, use the following steps to reboot the recorder.
1. Press the [MENU] button.
The Menu appears.
2. Press the [
,
] buttons to select [Setup/Info]
and press the [ ] button to confirm the entry.
Confirm
Select
RETURN MENU
CONTROL PANEL
ON/
OFF
Cursor button
MENU button
3. Press the [
,
] buttons to select [Reboot]
and press the [ ] button to confirm the entry.
Confirm
Select
The Reboot confirmation screen appears.
4. Press the [
,
] buttons to select [OK] and
press the [ ] button to confirm the entry.
Select
Confirm
A reboot takes between 40 to 50 seconds to complete.