Panasonic AG-CPD20P - Administrator Setup - Video Allocation; Detecting Connected Cameras; Manually Setting Camera Connections

78
79
Administrator Setup
(continued)
Video Allocation
Detect
Press the [
,
] buttons to select [Detect] and
press the [ ] button.
Confirm
Select
Cameras connected to the recorder are detected, and the
connected status are displayed.
ON: Connected
OFF: Not connected
The recommended preset settings are set for Preset1,
Preset2, and Preset3.
(See “Camera Connection and Combination of Cameras” on
page 117.)
Setting camera connection manually
1. Press the [
,
] buttons to select a camera.
Select
2. Press the [
,
] buttons to change the
settings and press the [ ] button.
Confirm
Select
Notes:
If it is set to “OFF” but a camera is connected, no signal
will be recorded.
If the camera input is disconnected on the Video Allocation
screen, the display will change to the Live screen.
•
•