Panasonic AG-CPD20P - File Specifications

30
31
Text Files Used with the Recorder
(continued)
File Specifications
Syntax:
Officer data files may contain no more than one
statement per line.
Multiple statements or definitions on one line are invalid.
Line Feed Codes:
Line feeds are coded as the hexadecimal values 0Dh
0Ah or just 0Ah.
Blank Lines:
Blank lines are ignored. Aside from the line feed code,
a blank line may contain only space and tab (09h)
characters.
Comment Lines:
Lines beginning with “#” (ignoring leading spaces or tabs)
are considered to be comment lines. These have no
special meaning, but may contain notes or descriptions.
Valid comment characters are those from 20h to 7Eh.
Definition Lines:
An identifier is a definition value.
These lines define names and other data. Leading spaces
and tabs are ignored.
Identifier descriptions are shown in the following table.
◎
: Required item
○
: An item with significance or an object of inspection
×
: Ignored item
•
•
•
Identifier
Max.
characters.
Description
Officer Data File
Officer/Administrator
Registration File
Officer 1 Officer 2 Officer Administrator
FirstName 50 Specify ofcer's rst name
◎ ◎ ◎ ◎
MiddleName 1 Specify ofcer's middle initial
○ ○ ○ ○
LastName 50 Specify ofcer's last name
◎ ◎ ◎ ◎
ID 50 Ofcer number for authentication
◎ ◎ ◎ ◎
Password 12
This should be entered when
making administrator settings.
○ ○ ○ ○
SDate 10 Shift start date YYYY-MM-DD
○ × × ×
SdayOfWeek 3 Shift start day of week
× × × ×
STime 5 Shift start time hh:mm
○ × × ×
EDate 10 Shift end date YYYY-MM-DD
○ × × ×
EdayOfWeek 3 Shift end day of week
× × × ×
ETime 5 Shift end time hh:mm
○ × × ×
WHour
*
5 Working period hh:mm
○ × ○ ×
Shift 50
A term for a work period, for
example, early shift.
○ × × ×
Area 50 Name of a location
○ × × ×
Source 50 Vehicle identication
○ × × ×
Border 73
Borders may be assigned to multiple
ofcers. Dened values are ignored.
For use within registration les.
× × ○ ○
Identifier
Max.
characters.
Description Classify
Classify 99 Denes Classify.
○
*
If SDate, STime, and ETime have been set, the WHour
setting will be ignored.
If a value of more than 24 hours is set, the default value of
8 hours will be set.
The minimum period to be set is 15 minutes.
•
•
•