Panasonic AG-CPD20P - Setting Work Time Data; Loading and Setting Work Time Data

42
43
Setting up/Deleting Officer Data
(continued)
Setting the Work Time data
Display the menu on the LCD panel. Then read the Work
Time data loaded in the recorder and set.
RETURN MENU
CONTROL PANEL
ON/
OFF
Cursor button
MENU button
1. Press the [MENU] button.
The Menu appears.
2. Press the [
,
] buttons to select [Setup/Info]
and press the [ ] button to confirm the entry.
Confirm
Select
3. Press the [
,
] buttons to select [Officer] and
press the [ ] button to confirm the entry.
Confirm
Select
The Officer setup top screen appears.
4. Press the [
,
] buttons to select [Work Time]
and press the [ ] button to confirm the entry.
Confirm
Select
The Work Time setting screen appears.
5. Press the [
,
] buttons to set Work Time data.
The setting is made on a 15-minute basis.
Select
Confirm
6. Press the [Set] button.
The Work Time data are set, and the Officer setup top
screen appears.