Panasonic AG-CPD20P - Playback Audio Control; Enabling and Disabling Playback Sound

68
69
Playback
(continued)
RETURN MENU
CONTROL PANEL
ON/
OFF
Cursor button
MENU button
Turning Playback sound ON and OFF
1. Press the [MENU] button.
The Menu appears.
2. Press the [
,
] buttons to select [Audio] and
press the [ ] button to confirm the entry.
Confirm
Select
3. Press the [
,
] buttons to select an audio
channel to be played back.
Select
4. Press the [
,
] buttons to select “ON” or “OFF”.
Select
Notes:
An administrator can set the audio output (Init Audio Out
(Play)) selected at power-on.
An audio channel set to OFF on the Audio Allocation
screen in Administrator setup cannot be selected. (See
“Audio Allocation” on page 78.)
•
•
Playback with the remote control panel is not available at
present. Upgrading is scheduled for the future.
For playback, it is recommended to use the Front-End
application or Back-End Client application.