Panasonic AG-CPD20P - Setting Video Output; Configuring VIDEO OUT 1 Signal

54
55
Viewing Live Video
(continued)
RETURN MENU
CONTROL PANEL
ON/
OFF
Cursor button
MENU button
Setting the output video
Set the through-out signal output from the [VIDEO OUT 1]
connector on the recorder.
1. Press the [MENU] button.
The Menu appears.
2. Use the [
,
] buttons to select [Audio/Video]
and press the [ ] button to confirm the entry.
Confirm
Select
3. Press the [
,
] buttons to select [VIDEO
OUT1].
Confirm
Select
4. Press the [
,
] buttons to select a signal, and
press the [ ] button to confirm the entry.
CAM1: Signal input to the [CAMERA 1] connector
CAM3: Signal input to the [CAMERA 3] connector
VIDEO OUT2: The same signal as that output from the
[VIDEO OUT 2] connector