Panasonic AG-CPD20P - Setting Area Data; Loading and Setting Area Data

40
41
Setting up/Deleting Officer Data
(continued)
Setting the Area data
Display the menu on the LCD panel. Then read the Area
data loaded in the recorder and set. For details on loading
the Area data, see “Load Area” on page 85.
RETURN MENU
CONTROL PANEL
ON/
OFF
Cursor button
MENU button
1. Press the [MENU] button.
The Menu appears.
2. Press the [
,
] buttons to select [Setup/Info]
and press the [ ] button to confirm the entry.
Confirm
Select
3. Press the [
,
] buttons to select [Officer] and
press the [ ] button to confirm the entry.
Confirm
Select
The Officer setup top screen appears.
4. Press the [
,
] buttons to select [Area] and
press the [ ] button to confirm the entry.
Confirm
Select
The registered Area data list appears.
5. Press the [
,
] buttons to select Area data (use
the [
,
] buttons to go between pages), and
press the [ ] button to confirm the entry.
Confirm
Select
The Area data are set, and the Officer setup top screen
appears.