Panasonic AG-CPD20P - Disconnecting from Front-End Application; Procedure to Disconnect PC

58
59
Viewing Live Video
(continued)
RETURN MENU
CONTROL PANEL
ON/
OFF
Cursor button
MENU button
Disconnecting the recorder from a Front-End
application
Connecting a PC with Front-End application installed to the
recorder and starting up a Front-End application freezes
the recorder in the live screen and disables the following
operations.
Setting up/Deleting Officer Data
A trial shoot
Playback
Administrator Setup
Exporting to the USB memory device
Follow these steps to disconnect a Front-End application
from the recorder to enable the above operations.
1. Press the [MENU] button.
The Menu appears.
2. Press the [
,
] buttons to select [Setup/Info]
and press the [ ] button to confirm the entry.
Confirm
Select
•
•
•
•
•
3. Press the [
,
] buttons to select [Disconnect
PC] and press the [ ] button to confirm the
entry.
Confirm
Select
These steps disconnect the recorder from a Front-End
application.
Notes:
Do not disconnect a PC with Front-End application from
the recorder during automatic uploading.
For details on how to restart the Front-End application, see
the Operating Instructions of the Front-End application.
•
•
Playback with the remote control panel is not available
at present. Upgrading is scheduled for the future.
For playback, it is recommended to use the Front-End
application or Back-End Client application.