Panasonic AG-CPD20P - Trigger Signal Configuration; Trigger Action and Detection Settings

24
25
Setup
(continued)
Setting Item Factory Default Value Description
5
Trigger Trigger signal (GPI1-16) settings
Trigger ON All trigger signal input or no input
Setting : ON (All trigger signal input permission), OFF
Action NONE Action upon trigger signal (GPI1-16) detection
Setting:
NONE (no operation)
REC (recording), STOP (stopping)
AUTO ZOOM (automatically zooms in/out or pauses)
P1 (selects Preset1 input)
P2 (selects Preset2 input)
*
2
P3 (selects Preset3 input)
*
2
P1REC (records video of Preset1 input)
P2REC (records video of Preset2 input)
*
2
P3REC (records video of Preset3 input)
*
2
CMA1 LED (Changes the status setting (on/off) of the
[REC] lamp on a Color Camera connected to
the [CAMERA 1] connector)
AUDIO2ON (records audio input to the [AUDIO IN 2]
connector)
AUDIO2MUTE (not records audio input to the [AUDIO IN 2]
connector)
TGT (REC) (records with a TGT input)
*
1
TGT (P1REC) (records video of Preset 1 input with a TGT
input)
*
1
TGT (P2REC) (records video of Preset 2 input with a TGT
input)
*
1
,
*
2
TGT (P3REC) (records video of Preset 3 input with a TGT
input)
*
1
,
*
2
OWN (REC) (records with an OWN input)
*
1
OWN (P1REC) (records video of Preset 1 input with an OWN
input)
*
1
OWN (P2REC) (records video of Preset 2 input with an OWN
input)
*
1
,
*
2
OWN (P3REC) (records video of Preset 3 input with an OWN
input)
*
1
,
*
2
Detection H Method for trigger signal (GPI1-16) detection
Choice of signal detection depends on set [Action]
REC, P1REC, P2REC, and P3REC modes
Setting: H (high-edge trigger)
Level H (high-level trigger)
L (low-edge trigger)
Level L (low-level trigger)
B (both-edge trigger)
P1, P2, P3, CAM1 LED, AUTO ZOOM, AUDIO2ON,
AUDIO2MUTE, STOP modes
Setting: H (high-edge trigger)
L (low-edge trigger)
B (both-edge trigger)
TGT(REC), TGT(P1REC), TGT(P2REC), TGT(P3REC),
OWN(REC), OWN(P1REC), OWN(P2REC), and OWN(P3REC),
modes
Setting: OFF, 200, …, 2, 1
NONE mode
Setting: H (high-edge trigger)
L (low-edge trigger)
•
•
•
•
Display OFF Character denition when one letter is displayed in the OSD
Setting : OFF, A - Z, –
*
1 These are selectable for Trigger 15 or Trigger 16.
*
2 These cannot be selectable if Preset2 or Preset3 has
not been allocated on the Video Allocation screen in
Administrator setup.
(Continued on the next page)