Panasonic AG-CPD20P - Network Configuration; IP Address and DHCP Settings; Wireless LAN Settings

28
29
Setup
(continued)
Setting Item Factory Default Value Description
10
Network Network setting
IP Address Each network setting
PC LAN Server1 DHCP Setting:
Server1, Server2
Server3, Server4
OFF
*
1
UPLOAD LAN Client DHCP Setting:
Client, OFF
*
2
USB WIRELESS
LAN
Client DHCP Setting:
Client, OFF
*
2
Wireless LAN Wireless network setting
AP Priority AP1 Highest AP (Access Point) priority setting
Setting: RANDOM, AP1 Highest
Network Access Point1 Network access point setting
Setting: Access Point1, Access Point2, …, Access Point10
Access Point DISABLE Access Point setting
Setting: ENABLE
DISABLE
Security ---- Security setting
Setting: WEP, WPA/WPA2-PSK, NONE
SSID ----
Service set ID setting
Network Key ----
Network key setting
Key Index
-
Key index setting
Setting: 1, 2, 3, 4
*
1 If Server1, Server2, Server3, or Server4 is selected, the
IP Address, Subnet Mask, and Gateway are fixed as
shown below. If Off is selected, the IP Address, Subnet
Mask, and Gateway can be changed.
Server1 Server2 Server3 Server4 OFF
IP Address 192.168.10.10 192.168.217.192 172.24.217.192 10.216.217.192 192.168.10.10
Subnet Mask 255.255.255.0 255.255.255.0 255.255.255.0 255.255.255.0 255.255.255.0
Gateway -- -- -- -- --
Client OFF
IP Address -- --
Subnet Mask -- --
Gateway -- --
*
2