Playback
(continued)
<Detailed Overlay OSD>
<Simple Overlay OSD>
Speed (MPH / km/h)
OWN : Own vehicle speed
TGT : Target vehicle speed
Location information (latitude)
Location information (longitude)
Playback filename
(Local time at start of recording)
“NO FILE” appears when there is no file to play back.
Mode indication
: Playback
: Pause
: Fast forward
: Rewind
: Slow
Playback speed and status indication
<Speed>
x1/10, x1/2, x4, x20, x200
<Status Display> (see “Status Display” on page 118)
READ ERROR, UNSUPPORTED,
PLAY ERROR
Playback location (in file units)
Date/Time
Trigger signal (GPI1-16) input status
(GPI1 to 16 are displayed in order from the left.)
The characters assigned by [Display] appear when the
state set by [Detection] occurs.
Mark position
: File beginning
: Trigger position
: Bookmark position
Sound output setting
(
: appears only during playback)
A1, 2, 3, or 4 : Audio1, 2, 3, or 4 is output.
Playback with the remote control panel is not available at
present. Upgrading is scheduled for the future.
For playback, it is recommended to use the Front-End
application or Back-End Client application.
To Next Page
Loading...
