297
DP-8032/8025
2008Ver. 1.2
(20) Pull the FNS Harness from the bottom hole and
secure with the Harness Clamp.
(21) Connect the Harness to CN724 on the SPC PC
Board.
(22) Install the Finisher IPC PC Board to CN725 on the
SPC PC Board.
(23) Remove 2 Shoulder Silver Screws (Upper) and 2
Silver Screws (Lower).
(24) Remove the Left Cover.
(25) Remove 2 Screws.
(26) Open the LVPS Cover.
To Next Page
Loading...
