Panasonic DP-C266

157
Chapter 5 Internet Fax
6 Enter a station name, and then select
“OK”.
z Enter a station name up to 15 characters.
z For instructions on using the onscreen
Keyboard, refer to Using the Keyboard in
the Operating Instructions (For Function
Parameters) of provided CD-ROM.
7 Enter a Key Name, and then select
“OK”.
z Key Names are displayed on the Touch
Panel Display to select destinations.
z For instructions on using the onscreen
Keyboard, refer to Using the Keyboard in
the Operating Instructions (For Function
Parameters) of provided CD-ROM.
8 Select whether to add a station to
“Favorites”.
9 Select a relay station or enter the
Email address of a relay station, and
then select “OK”.
z This screen appears when the Function
Parameter “140 LAN RLY XMT Request”
(Fax/Email Settings > Fax Parameters) has
been set to “Valid”.
z Only one destination can be programmed as
a relay station.
z
Before you select a relay station, you must
pre-program an Email address in “
40 Relay
XMT Password
” as the user name as
follows:
“
Relay XMT Password “@” the host and
domain names registered with the DNS
server
”
Ex: sg-rly@singapore.panasonic.co.sg
z Press the Reset key to return the machine
to the initial screen of the currently active
mode.
Select to display the
station in “Favorites”.
Select not to display the
station in “Favorites”.