40
Chapter 2 Basic Fax Transmission
Transmitting 2-Sided Originals
2-sided originals loaded in the ADF are scanned automatically with a specified binding edge position,
and transmitted.
Two binding edge selections are available:
• Long Edge: 2-sided scanning is aligned to the long edge of the original.
• Short Edge: 2-sided scanning is aligned to the short edge of the original.
z This feature works only when originals are loaded in the ADF.
z The Verification Stamp feature does not work when 2-Sided scanning is selected.
1
Place original(s) on the ADF.
z Refer to Placing Originals (see page 14).
2
Press the Fax key.
3
Select “Basic Menu”.
4
Select “2-Sided Original”.
Long Edge Short Edge
Face up. Up to 100 sheets
(20 lb/Letter)
To Next Page
Loading...
