118
Chapter 5 Internet Fax
Using the Address Book
Use a Key Name
If an Email address is pre-programmed in the
Address Book, it can be selected by using a Key
Name.
z To use the Address Book, it is necessary to have
Email addresses added to the Address Book in
Function Parameters. Refer to Adding an Email
Address to Address Book (see page 180).
1
Follow the step 1 and 2 on page 114.
2
Select a Key Name tab.
3
Select the Email address you want to
send to.
z Select the same destination to cancel a
choice.
z To enter additional Email addresses, repeat
steps 2 and 3.
4
Press the Start key.
The original(s) are stored into memory with a
file number. Then the Email transmission
starts.
Select from “Favorites”
If an Email address is pre-programmed in the
“Favorites”, it can be selected from
“Favorites”.
z To use the Address Book, it is necessary to have
Email addresses added to the Address Book in
Function Parameters. Refer to Adding an Email
Address to Address Book (see page 180).
z If there are any Email addresses added in the
“Favorites”, the Address Book opens the
“Favorites” tab first.
1
Follow the step 1 and 2 on page 114.
2
Select “Favorites”.
3
Select the Email address you want to
send to.
z Select the same destination to cancel a
choice.
z To add more Email addresses, select other
addresses.
4
Press the Start key.
The original(s) are stored into memory with a
file number. Then the Email transmission
starts.
To Next Page
Loading...
