54
Chapter 2 Basic Fax Transmission
Using Program Keys
If frequently used communication tasks are pre-programmed onto a respective program dialing button,
the programmed operating sequence can be recalled by simply selecting the assigned button.
Program dialing not only simplifies repetitive and complex operational sequences but also prevents
operator errors.
To use a Program key, follow the steps below.
z To use this feature, the operating sequence must be programmed onto the button in advance.
Refer to Setting for Program Dialing (see page 187).
z To check what operation was pre-programmed onto a program button, confirm by printing the program list.
Refer to Printing the Program List (see page 194).
1
Place original(s).
z Refer to Placing Originals (see page 14).
2
Press the Fax key.
3
Select āProgram/Groupā.
4
Select the Program key.
5
Press the Start key.
Communication starts, or original(s) are stored
into memory.
To Next Page
Loading...
