156
Chapter 5 Internet Fax
Adding End Receiving Stations for Relayed Transmission
You can add end receiving stations to the Address Book by the following procedure.
z If broadcasting to multiple end receiving stations is required, use group dialing (see page 189).
z The Function Parameter “140 LAN RLY XMT Request” (Fax/Email Settings > Fax Parameters) must have
been set to “Valid” to have a LAN Relayed transmission request pre-programmed in the Address Book. For
more operational details, refer to Fax/Email Settings in the Operating Instructions (For Function Parameters)
of provided CD-ROM.
z For instructions on registration in the Address Book, refer to Address Book (see page 176).
z You cannot use the address registered for Relayed transmission for Confidential communication, Sub-address
communication, and Password transmission. Register an address without a relayed station (see page 177).
1
Press the Function key.
2
Select “Fax/Email Settings”.
3
Select “00 Address Book”.
4
Select “01 Add Telephone Number”.
5
Enter a fax number, and then select
“OK”.
z Select “Clear” to delete the fax number one
digit at a time.
z For instructions on using the onscreen
Keyboard, refer to Manual Dialing (see
page 20).
To Next Page
Loading...
