27
Chapter 2 Basic Fax Transmission
Redialing
To redial the most recently dialed number, follow the steps below.
z The “Redial” button cannot be used when the Function Parameter “136 Restrict Direct Dial” (Fax/Email
Settings > Fax Parameters) is set to “Valid”.
1
Follow the step 1 and 2 on page 18.
2
Select “Redial”.
3
Confirm that this is the fax number that
you want to send to, and then select
“OK”.
z When the Function Parameter “137 Re-
enter Direct Dial” (Fax/Email Settings >
Fax Parameters) is set to “Valid”, a
message appears on the Number Pad
screen prompting to re-enter the fax number
for confirmation.
4
Press the Start key.
The original(s) are stored into memory with a
file number. Then starts dialing the telephone
number.
To Next Page
Loading...
