16
Chapter 2 Basic Fax Transmission
z For Auto Reset
When the pop-up screen is displayed while setting
the address or facsimile mode, select “Continue?” on
the Touch Panel Display, or press the Stop key on the
Control Panel.
z The initial setting for Auto Reset Time is 1 minute.
If you do not touch any key for 1 minute, the Touch
Panel Display will be back to the initial screen of the
active function automatically. 20 seconds before
resetting, the “Continue?” screen is displayed to
extend the auto reset time for another 1 minute.
If you wish to change Auto Reset Time, consult with
your Key Operator.
z Original Size
From the ADF
Maximum Size
Scanning
Direction
2000 mm (78.7")
279 mm (11")
Minimum Size
140 mm (5.5")
140 mm (5.5")
Scanning
Direction
From the Platen Glass
Maximum Size
432 mm (17")
279 mm (11")