23
Chapter 2 Basic Fax Transmission
Use Group Dialing
For transmission to multiple destinations using
group dialing, follow the steps below.
z
The group dialing button must be pre-programmed.
Refer to
Setting for Group Dialing (see page
189)
.
1
Follow the step 1 and 2 on page 18.
2
Select “Program/Group”.
3
Select the button for the desired
destination group.
z To cancel a choice, select the same
destination again.
z To confirm the destinations, select
“Destinations: ###” on the upper left corner
of the screen.
4
Press the Start key.
The original(s) are stored into memory with a
file number. Then starts dialing the telephone
number.
To Next Page
Loading...
