59
Chapter 2 Basic Fax Transmission
1
Press the Function key to open the
Function Parameters screen.
2
Select “Fax/Email Settings”.
3
Select “04 Key Operator Mode”.
4
Enter the Key Operator password, and
then select “OK”.
z If you make a mistake, press the Clear key
or select “Back Space” to delete.
5
Select “01 Fax Parameters”.
6
Select “120-159”.
z You can also proceed to step 8 by entering
122 with the Keypad and pressing the Start
key.
7
Select “122 Dial Prefix”.
8
Enter the Dial Prefix Number (4 digits),
and then select “OK”.
z If you make a mistake, select “Clear” to
delete.
z Press the Reset key to return the machine
to the initial screen of the currently active
mode.
To Next Page
Loading...
