61
Chapter 3 Convenient Fax Features
5
Set the deferred time, and then select
“OK”.
z Set the time in the 24-hour format.
Ex: 21: 00
z If you make a mistake, select “Clear” to
delete entries one digit at a time.
6
Set “Quality Adj.” as required.
z Refer to Setting Original Quality (see page
34).
7
Select a destination.
z Refer to Entering a Destination (see page
20).
8
Press the Start key.
Document(s) are stored into memory.
z The programmed deferred communication
time can be modified.
For instructions on how to modify the
communication time, refer to Editing
Communication Reservations (see page
170).
z It you need to delete a reserved
communication file, or to cancel a time-
controlled communication, refer to Deleting
a Communication Reservation File (see
page 172).
z A communication journal is printed if the
transmission fails for any reason.
(Ex: Remote station was busy.)
Refer to Printing a Communication
Reservation File (see page 173) and
Communication Journal (see page 201).
z Press the Reset key to return the machine
to the initial screen of the currently active
mode.
To Next Page
Loading...
