Overview
FPΣ User's Manual
10
Name Description Product no.
FPΣ communication cassette –
1-channel RS485 type
1-channel unit with a 2-wire RS485 port FPG-COM3
FPΣ communication cassette –
1-channel RS485 and 1-channel
RS232C combination type
2-channel unit with a 2-wire RS485 port and a 3-wire
RS232C port
Simultaneous communication via RS485 and RS232C is
possible.
FPG-COM4
2.2.4 Units for FP0 and FPΣ
The I/O expansion units and intelligent units of the FP0 series and the FP0 power supply unit
can be used with the FPΣ.
REFERENCE
For information on the FP0 units see the FP0 Hardware Manual ACGM0084.
2.2.5 Accessories
Type Description Product no.
FP0 power supply
24V DC power supply 0.7A FP0-PSA2
FP power supply
24V DC power supply 2.1A FP-PS24-050E
FPΣ battery
Necessary for backup of data registers etc. or for
using the clock/calendar function
AFPG804
Cable length: 1m
AFP0521D
AFP0521BLUED
AFP0521COLD
I/O cable
10-pin MIL wire-press socket
on one side, 2 pieces (blue,
white, or multi-colored)
Cable length: 3m
AFP0523D
AFP0523BLUED
FP0R/FPΣ power supply cable
Maintenance part (packed with
CPU)
Cable length: 1m AFPG805
Phoenix connector (2 pcs)
Terminal block socket;
maintenance parts (packed with relay output type)
AFP0802
Connector set
40-pin MIL wire-press socket;
maintenance parts (packed with I/O expansion unit);
2 pieces
AFP2801
MIL connector (2 pcs)
10-pin MIL wire-press socket;
maintenance parts (packed with transistor output
type)
AFP0807
Pressure connection tool
For wiring transistor output type connections AXY5200FP
FP0 slim type mounting plate (10
pcs)
For vertical mounting of FP0 expansion units AFP0803
FP0 slim 30 type mounting plate (10
pcs)
For vertical mounting of the FPΣ CPU or FPΣ
expansion units
AFP0811
FP0 flat type mounting plate (10 pcs)
For horizontal mounting of the CPU AFP0804
Data clear type AFP8670
FP Memory Loader
For reading/writing
programs from/to PLC
Data hold type AFP8671
To Next Page
Loading...
Need help?
General
