Panasonic FPG-COM2-A User Manual

FPΣ User's Manual
9.3 FP Memory Loader
255
“01234567”
“01234567”
“abcdefgh” -----
43
1
2
Programs can only be downloaded to PLCs that are protected by identical passwords (see
table below)
1
The FP Memory Loader contains a password protected program:
Password: 01234567
2
Download is possible only if the target PLC is protected by the same password ("01234587").
3
Download to a target PLC that is protected by a different password ("abcdefgh") is not possible.
4
Download to a target PLC that is not password-protected (-----) is not possible.
CAUTION
During program download from the FP Memory Loader to a target PLC, the
password set on the source PLC may be changed under certain conditions:
Security setting on FP Memory Loader
Password setting on target PLC
after download
No password set Password will be cleared.
8-digit password set, "Allow download to PLC only if
password in the PLC is the same" setting disabled
Password will be overwritten with new 8-
digit password.
8-digit password set, "Allow download to PLC only if
password in the PLC is the same" setting enabled
Password will not be changed (no download
possible).

Panasonic FPG-COM2-A Specifications

General

Brand	Panasonic
Model	FPG-COM2-A
Category	Controller
Language	English