312
Record of Changes
Manual No. Date Description of changes
ARCT1F333E/
ACG-M333E
Sept. 2001 First edition
ARCT1F333V1.0END Dec. 2001 European edition
• addition of FPWIN Pro examples and procedures
ARCT1F333E-1/
ACG-M333E-1
Feb. 2002 2nd edition
Additions:
• Control units
FPG-C32T2
FPG-C24R
• Expansion unit
FPG-XY64D2T
• Tool software
• FPWIN Pro Ver. 4
ARCT1F333V2.0END April 2002 FPWIN Pro examples added for instructions F174, F175, F176
ARCT1F333V2.1END July 2002 Correction of errors
• programming example “Reading elapsed value (F1)” (pp. 7-15, 7-54)
• programming examples F166 and F167 (pp. 7-16 ff.)
• programming example “Double-Speed Inverter”, GVL (p. 7-22)
• description F171, deviation counter clear signal (p. 7-34)
• F173, PWM output function, note on out of range duty area (p. 7-74)
• programming example F159, body (p. 10-14)
• flag number R9049 changed to R9048 (p. 10-35)
• command name SYS2 changed to SYS1 (p. 11-18)
Additions
• product numbers for power supply unit (p. 6-3)
• F172, target value ranges (p. 7-37)
• IEC addresses (appendix)
ARCT1F333E-2/
ACG-M333E-2
Nov. 2002 Additions
• Control units
• PNP output type FPG-C28P2
• Thermistor input function type (part numbers ending in TM)
• Expansion units
• Information about intelligent units
ARCT1F333V3.0END May 2003 FPWIN Pro examples added to new sections
Information on initial frequency of pulse output instructions added
ARCT1F333V4.0END March 2004 Additions
• communication cassette FPG-COM4
• FPΣ expansion unit FPGXY64D2P
• information on terminating resistor in RS485 connections
Corrections
To Next Page
Loading...