314
Manual No. Date Description of changes
ARCT1F333V9EN Nov. 2010 Synchronization with Japanese manual ARCT1F333E-9 201002
Additions/updates
• FPΣ 32k types C32T2H(TM), C28P2H(TM), C24R2H(TM)
• Procedure for changing the PLC type from FPΣ 12k to 32k type in
FPWIN Pro
• FPΣ positioning unit RTEX
• FPΣ S-Link master unit
• MEWTOCOL-COM Master mode
• Modbus RTU communication mode
• Section "Names and Principle Applications of the Ports"
• Specifications for program controlled communication via TOOL port
• Spefications and examples for PLC link 1
• Programming examples changed to match the new programming
methods using system variables
• Information on downloading programming examples from the
Panasonic Web site
• Security functions (upload protection, password protection)
• FP Memory Loader
• Section "Scope of this manual"
• In MEWTOCOL-COM mode, term pair computer/PLC changed to
slave/master
Deletions
• Detailed programming tool information for FPWIN Pro and FPWIN
GR
• Connection diagrams for motor drivers (will be available for
download)
• Programming examples for HSC and pulse output (available for
download)
• Table of special internal relays (available in FPWIN Pro online help)
• Table of special data registers (available in FPWIN Pro online help)
Corrections
• Version number of FPWIN Pro required for FPΣ changed from 4.0 to
4.01
• Control flags R903E and R903F (circulation interpolation) corrected
to R904E and R904F in pulse output specifications table
• End value of starting address range for program controlled
communication changed from 32764 to 32762
To Next Page