CPU Types
FPΣ User's Manual
36
Confirm each value with [Enter].
Using a program
1. The date/time values are written to special data registers DT90054 to DT90057.
2. A value of 16#8000 is written to DT90058.
NOTE
• The values can be set using the rising edge signal “P” or by changing
16#8000 to 16#0000.
• To access special data registers and special internal relays, use the PLC-
independent system variables. You can insert system variables directly into
the POU body: Use the "Variables" dialog without entering a declaration in
the POU header. Please refer to the FPWIN Pro online help for detailed
information on using system variables.
EXAMPLE
Set the time to 12:00:00 on the 5th day when X0 turns to TRUE. In this example, the
values of DT90054, DT90055, and DT90058 are written using system variables.
LD Body
To Next Page
Loading...
Need help?
General
