Panasonic HEVC Advance AW-UE160WP - Page 120

V-LOG OUTPUT SELECT [V-LOG, V-709]
Select the signal output when [V-LOG] is [On].
V-LOG Output with a gamma curve that has a wide range of
tones and latitude (exposure range).
V-709 Converted for output to images suited to previewing.
Factory settings: V-LOG
<NOTE>
• This cannot be set when the [Basic Config] – [V-LOG] is [Off].
CHAR [Off, On]
Set whether to superimpose the OSD.
Factory settings: On
3G SDI [LEVEL-A, LEVEL-B]
When [Format Select] (12G SDI Out/SFP+) is [1080/59.94p],
[1080/60p] or [1080/50p], select the format for outputting 3G SDI
signals.
Factory settings: LEVEL-A
<NOTE>
• [3G SDI] cannot be changed if [Format Select] (12G SDI Out/SFP+)
is other than [1080/59.94p], [1080/60p] or [1080/50p].
12G SDI Out/SFP+
Make the settings for output from the 12G SDI OUT/SFP+ connector.
Format Select
Set the output format.
The following formats can be set depending on the settings in
[Format] in [Basic Config].
Frequency System Format
Format
(12G SDI Out/SFP+)
60Hz 2160/60p 2160/60p
1080/60p
1080/60p 1080/60p
59.94Hz 2160/59.94p 2160/59.94p
1080/59.94p
*
1
2160/29.97p 2160/29.97p
1080/29.97p
1080/119.88p 1080/59.94p
*
3
1080/59.94p 1080/59.94p
1080/59.94i
1080/29.97p 1080/29.97p
720/59.94p 720/59.94p
50Hz 2160/50p 2160/50p
1080/50p
*
2
2160/25p 2160/25p
1080/25p
1080/100p 1080/50p
*
3
1080/50p 1080/50p
1080/50i
1080/25p 1080/25p
720/50p 720/50p
24Hz 2160/24p 2160/24p
1080/24p
1080/24p 1080/24p
23.98Hz 2160/23.98p 2160/23.98p
1080/23.98p
1080/23.98p 1080/23.98p
*
1
When [UHD Crop] is [Crop(720)], output is 720/59.94p.
*
2
When [UHD Crop] is [Crop(720)], output is 720/50p.
*
3
For 119.88p (or 100p), "Frame 1" is output with the frame rate cut
to half (59.94p (
or 50p)).
Factory settings: 2160/59.94p or 2160/50p
Output Item [Menu Only, Status]
Select the type of OSD to be superimposed on output video.
Menu Only Displays the OSD menu only.
Status Displays the OSD menu and OSD status.
Factory settings: Menu Only
HDR OUTPUT SELECT
[SDR(709), HDR(709), HDR(2020)]
Select the signal output when [HDR] is [On].
SDR(709) Selects the SDR output signal.
HDR(709) Selects the HDR output signal (BT.709 equivalent color
gamut).
HDR(2020) Selects the HDR output signal (BT.2020 equivalent color
gamut).
Factory settings: HDR(2020)
<NOTE>
• This cannot be set when the [Basic Config] – [HDR] is [Off].
• [HDR(2020)] can be selected only when [Basic Config] – [GAMUT]
is [WIDE_G2].
120
Web screen configurations (continued)