Preset Name [Reset, Hold]
When registering a preset memory, set whether to reset the
previously registered preset name or keep it.
Reset When registering a preset memory, reset the previously
registered preset name.
The preset name after resetting will be [Preset
***
]. (
***
is a 3 digit preset number: 001 to 100)
Hold When registering a preset memory, keep the previously
registered preset name.
Factory settings: Reset
<NOTE>
• The factory default setting for the preset name is [Preset
***
]. (
***
is
a 3 digit preset number: 001 to 100)
• The registration of preset names can be done in the web browser.
0 to 9, A to Z, a to z, _ , and space
Preset Iris [Off, On]
When the preset memory is played back, set whether the
reproduction of the values in the various menus related to Iris is off/
on.
When set to [On], the values set in the various menus below are
reproduced when preset memory is played back.
- [PAINT] – [IRIS] – [AUTO IRIS]
- [PAINT] – [IRIS] – [WINDOW SELECT]
- [PAINT] – [IRIS] – [PICTURE LEVEL]
- [PAINT] – [IRIS] – [IRIS SPEED]
Factory settings: Off
<NOTE>
• Its setting takes effect when [Mode A] or [Mode B] has been
selected as the [Preset Scope] setting.
Preset Shutter [Off, On]
When the preset memory is played back, set whether the
reproduction of the SHUTTER setting value is Off/On.
<NOTE>
• This is only enabled when [Preset Scope] is set to [Mode A].
• SHUTTER values are reproduced only when the frame rate when
the preset memory was registered and the frame rate when playing
back the preset memory match.
Preset Zoom Mode [Mode A, Mode B]
Select the zoom operation for when preset memory is recalled.
Mode A Perform smooth zoom operation to match the behavior
of pan/tilt.
Mode B Perform constant speed zoom operation to match the
behavior of pan/tilt.
Factory settings: Mode A
Freeze During Preset [Off, On]
Turn the function for freezing images during preset playback off/on.
When this is set to [On], preset playback is performed with a still of
the image immediately preceding the start of preset playback being
output. The image freeze is released when preset playback is finished.
Factory settings: Off
Preset Scope [Mode A, Mode B, Mode C]
Selected here are the setting items to be recalled when the contents
of the preset memory are regenerated.
Mode A Pan, Tilt, Zoom (including digital zoom), Focus, Iris, Gain,
Shutter, white balance adjustment value
Mode B Pan, Tilt, Zoom (including digital zoom), Focus, Iris
Mode C Pan, Tilt, Zoom (including digital zoom), Focus
Factory settings: Mode A
Preset Digital Extender [Off, On]
Turns the preset digital extender function Off/On.
When set to [On], the digital extender function configuration will be
recalled when regenerating the preset memory.
When set to [Off], the digital extender function configuration will not
be recalled when storing the preset memory.
Factory settings: Off
Preset Crop [Off, On]
When the preset memory is played back, set whether the
reproduction of content set in the various [Crop Mode] menus is Off/
On.
When set to [On], the content set in the various [Crop Mode] menus is
reproduced when preset memory is played back.
When set to [Off], the content set in the various [Crop Mode] menus is
not reproduced when preset memory is played back, with the current
values being kept.
Factory settings: Off
<NOTE>
• This is only enabled when [Crop Mode] is set to [Crop(720)] or
[Crop(1080)].
• When [Crop Mode] is [Off] or [Crop(1080)] and preset memory is
registered and preset playback is executed when [Crop Mode] is
[Crop(720)], then, even if [Preset Crop] is [On], the content set in
each menu of [Crop Mode] is not recalled.
• When [Crop Mode] is [Crop(720)] and preset memory is registered
and preset playback is executed when [Crop Mode] is [Crop(1080)],
then, even if [Preset Crop] is [On], the content set in each menu of
[Crop Mode] is not recalled.
Preset Thumbnail Update [Off, On]
Turn Off/On the function for registering the still image (thumbnail) for
the images being output when a preset memory is registered.
When set to [On], the still image (thumbnail) for the images being
output is registered when registering a preset memory.
When set to [Off], the still image (thumbnail) for the images being
output is not registered when registering a preset memory, but rather
the still image (thumbnail) previously registered is maintained.
Factory settings: On
<NOTE>
• When [IP SIGNAL] – [IP(H.264/H.265)] – [CHAR] is [On], the menu
screen is imported into the thumbnails.
• When [Crop Mode] is [Crop(720)] or [Crop(1080)], the cropped still
image is registered rather than the Full image.
• Still images (thumbnails) registered in the preset memory are
deleted when user files are uploaded with a web screen, etc.
(→ page 189)
• When continuous registration of preset memories is performed
(continuous registration within 3 seconds), still images (thumbnails)
for the second preset memory on may not be registered, with black
still images (thumbnails) being used instead.
163
Web screen configurations (continued)
To Next Page
Loading...
