Max RTP packet size
[Unlimited-1500byte, Limited-1280byte]
Specify whether to limit the size of RTP packets sent from the camera
when using RTP to view camera images.
Unlimited-1500byte Unlimited (1500 byte)
Limited-1280byte Limited (1280 byte)
Factory settings: Unlimited-1500byte
Normally, it is recommended that the [Unlimited-1500byte] setting be
used.
Select [Limited-1280byte] when the packet size of the used
communication line is limited. For details on the maximum packet size
of communication lines, consult your network administrator.
HTTP max segment size (MSS) [Unlimited(1460byte),
Limited(1280byte), Limited(1024byte)]
Select whether to limit the maximum segment size (MSS) transmitted
by a camera when viewing camera images using HTTP.
Unlimited(1460byte) Unlimited (1460 byte)
Limited(1280byte) Limited (1280 byte)
Limited(1024byte) Limited (1024 byte)
Factory settings: Unlimited(1460byte)
Normally, it is recommended that the default setting be used.
Select [Limited(1024byte)]/[Limited(1280byte)] when the maximum
segment size (MSS) of the used communication line is limited. For
details on the maximum segment size (MSS) of communication lines,
consult your network administrator.
Easy IP Setup accommodate period
[20min, Unlimited]
Sets the time allowed for network setting operations from EasyIP
Setup Tool Plus. You can set either [20min] from the time this unit is
started or [Unlimited].
20min
Allows camera setting operations on the EasyIP Setup
Tool Plus for just 20 minutes after start up of this unit.
Unlimited
Allows camera setting operations on the EasyIP Setup
Tool Plus at any time.
Factory settings: 20min
<NOTE>
• Camera display on the EasyIP Setup Tool Plus is enabled all the
time, and the camera screen can be opened.
• For details on the address settings of each server, consult your
network administrator.
• The port forwarding function converts a global IP address to a
private IP address, and includes “static IP masquerade” and
“network address translation (NAT)”. This function is set to the
router.
• To access the camera via the Internet after connecting it to a router,
it will be necessary to set an individual HTTP port No. for each
network camera and to convert the address using the router’s port
forwarding function. For details, refer to the operating instructions
for the router.
WAN global address
vvv.xxx.yyy.zzz
Enter <global address>
from Internet:
<port number> as URL in
web browser
vvv.xxx.yyy.zzz:50000
vvv.xxx.yyy.zzz:50001
Internet
(WAN)
Cable
modem/
XDSL
modem
LAN private address
192.168.0.254
Address exchange via port forwarding
vvv.xxx.yyy.zzz:50000
→192.168.0.254:50000
Address exchange via port forwarding
vvv.xxx.yyy.zzz:50001
→192.168.0.254:50001
Private address
192.168.0.2
Port number: 50000
Private address
192.168.0.1
Port number: 50001
Advanced network setting screen [Advanced]
Click the [Advanced] in the network setup screen [Network].
Settings relating to the NTP and HTTPS functions are performed here.
Click the links to each item to move to the respective setting page.
z NTP
Settings relating to the NTP server address and port No. are performed
here.
The setting is confirmed with the [Set] button.
Synchronization with NTP [On, Off]
On
The time adjusted automatically through synchronization
with the NTP server will be used as this unit’s standard
time.
Off
The time set in Date & time screen [Date&Time] will be
used as this unit’s standard time.
Factory settings: Off
172
Web screen configurations (continued)
To Next Page
Loading...
