Panasonic HEVC Advance AW-UE160WP - HTTPS and Security Certificate Management

NTP server address setting [Auto, Manual]
Select the method to acquire the NTP server address.
Auto Acquires the NTP server address from the DHCP server.
Manual
Sets the address by inputting the NTP server address in
[NTP server address].
Factory settings: Manual
<NOTE>
• To acquire the NTP server address from the DHCP server, [DHCP]
or [DHCPv6] must be set to [On] in the [Network] of the network
setup screen [Network]. (→ page 169)
NTP server address
When [Manual] is selected in the [NTP server address setting], input
the IP address or host name of the NTP server.
Maximum number
of characters
1 to 128 characters
Characters that
can be entered
Alphanumeric characters, symbols : . _ -
Factory settings: blank
<NOTE>
• To input the [NTP server address] host name, the [DNS] setting
must be selected on the [Network] of the network setup screen
[Network]. (→ page 169)
• This does not work when link local address is set in [NTP server
address].
NTP port [1 to 65535]
Input the port No. of the NTP server.
The following port numbers are used by the unit so they cannot be
used.
20, 21, 23, 25, 42, 53, 67, 68, 69, 80, 110, 161, 162, 443, 546, 547,
554, 995, 5960 to 5985, 7960 to 8060, 10669, 10670, 11900, 59000
to 61000
Factory settings: 123
Time adjustment interval [1h to 24h]
Selects the interval (1 to 24 hours in 1-hour increments) for acquiring
the time from the NTP server.
Factory settings: 1h
z HTTPS
Using the HTTPS function enables access to the camera to be
encrypted and communication safety to be improved.
The setting is confirmed with the [Set] button.
See page 179 for details on the HTTPS setup method.
CRT key generate
A CRT key (SSL encryption key) is generated by HTTPS.
To generate a CRT key, click the [Execute] button to display the [CRT
key generate] dialog.
For details, refer to “Generating a CRT key (SSL encryption key)”
(→ page 180).
Self‑signed Certificate ‑ Generate
A self-signed security certificate is generated by HTTPS. (Self-signed
Certificate)
To generate a self-signed certificate (security certificate), click the
[Execute] button to display the [Self-signed Certificate - Generate]
dialog and perform the operation.
For details, refer to “Generating a self-signed certificate (security
certificate)” (→ page 180).
Self‑signed Certificate ‑ Information
This displays information relating to the self-signed certificate
(security certificate).
When the [Confirm] button is clicked, the registered content of the
generated self-signed certificate (security certificate) is displayed in
the [Self-signed Certificate - Confirm] dialog.
Click the [Delete] button to delete the generated self-signed certificate
(security certificate).
173
Web screen configurations (continued)