Panasonic HEVC Advance AW-UE160WP - Page 55

HDR OUTPUT SELECT
[SDR(709), HDR(709), HDR(2020)]
Select the signal output when [HDR] is [ON].
SDR(709) Selects the SDR output signal.
HDR(709) Selects the HDR output signal (BT.709 equivalent color
gamut).
HDR(2020) Selects the HDR output signal (BT.2020 equivalent color
gamut).
<NOTE>
• This cannot be set when the [BASIC CONFIG] – [HDR] is [OFF].
• [HDR(2020)] can be selected only when [BASIC CONFIG] –
[GAMUT] is [WIDE_G2].
V-LOG OUTPUT SELECT [V-LOG, V-709]
Select the signal output when [V-LOG] is [ON].
V-LOG Output with a gamma curve that has a wide range of
tones and latitude (exposure range).
V-709 Converted for output to images suited to previewing.
<NOTE>
• This cannot be set when the [BASIC CONFIG] – [V-LOG] is [OFF].
OUTPUT ITEM [MENU ONLY, STATUS]
Select the type of OSD to be superimposed on output video.
MENU ONLY Displays the OSD menu only.
STATUS Displays the OSD menu and OSD status.
CHAR [OFF, ON]
Set whether to superimpose the OSD.
3G SDI [LEVEL-A, LEVEL-B]
When [FORMAT SELECT] (3G SDI OUT2/PM) is [1080/59.94p],
[1080/60p] or [1080/50p], select the format for outputting 3G SDI
signals.
<NOTE>
• [3G SDI] cannot be changed if [FORMAT SELECT] (3G SDI OUT2/
PM) is other than [1080/59.94p], [1080/60p] or [1080/50p].
HDMI
Make the settings for output from the HDMI connector.
FORMAT SELECT
Set the output format.
The following formats can be set depending on the settings in
[FORMAT] in [BASIC CONFIG].
Frequency System Format Format (HDMI)
60Hz 2160/60p 2160/60p
1080/60p
1080/60p 1080/60p
59.94Hz 2160/59.94p 2160/59.94p
1080/59.94p
*
1
2160/29.97p 2160/29.97p
1080/29.97p
1080/119.88p 1080/119.88p
1080/59.94p 1080/59.94p
1080/59.94i
1080/29.97p 1080/29.97p
720/59.94p 720/59.94p
50Hz 2160/50p 2160/50p
1080/50p
*
2
2160/25p 2160/25p
1080/25p
1080/100p 1080/100p
1080/50p 1080/50p
1080/50i
1080/25p 1080/25p
720/50p 720/50p
24Hz 2160/24p 2160/24p
1080/24p
1080/24p 1080/24p
23.98Hz 2160/23.98p 2160/23.98p
1080/23.98p
1080/23.98p 1080/23.98p
*
1
When [UHD CROP] is [CROP(720)], output is 720/59.94p.
*
2
When [UHD CROP] is [CROP(720)], output is 720/50p.
HDR OUTPUT SELECT
[SDR(709), HDR(709), HDR(2020)]
Select the signal output when [HDR] is [ON].
SDR(709) Selects the SDR output signal.
HDR(709) Selects the HDR output signal (BT.709 equivalent color
gamut).
HDR(2020) Selects the HDR output signal (BT.2020 equivalent color
gamut).
<NOTE>
• This cannot be set when the [BASIC CONFIG] – [HDR] is [OFF].
• [HDR(2020)] can be selected only when [BASIC CONFIG] –
[GAMUT] is [WIDE_G2].
55
Camera menu items (continued)