Select a menu of Setting Item by
8
(From Section 9.6)
pushing “ ” or “ ” key.
(2) F. CIS LED / B. CIS LED
Set the parameter by pushing
“ ” or “ ” key.
Push STOP/START key once.
Confirm Test result.
Re-try Test?
No
Yes
(3) F. CIS Black Level / B. CIS Black Level
(15) Double Feed
(Check double feed sensitivity after
setting input-level)
Push STOP/START key.
9
Push HOME key once.
(To Section 9.6)
Push STOP/START key.
(2) Level 0-255
(3) Level 0-255
(15) Level 0-255
(15) More than 900 when
setting level value is
120.
To Next Page
Loading...
