Select a menu of Setting Item by
8
(From Section 9.6)
pushing “ ” or “ ” key.
(4) Document Sensor
(Check each document
sensor condition)
Push STOP/START key once.
Confirm the Test result.
(5) Sensor Sensitive Level
(6) Door & Home Sensor
Push STOP/START key.
Select Sensor Test ((4) or (5) or (6) or (11) or (12))
Execute each Test
(4)
P: Status of Paper Feed Sensor
W: Status of Waiting Sensor
(12) Memory Test
(13) Sleep Mode
L: Status of Skew (L) Sensor
R: Status of Skew (R) Sensor
S: Status of Starting Position Sensor
J: Status of Jam Sensor
E: Status of Ending (Front) Position Sensor
e: Status of Ending (Back) Position Sensor
1,2,3,4,5 :
P W L R S J E e 1 2 3 4 5
1 0 1 0 1 1 0 1 0 0 0 0 1
1 2 3 4 5
A3 0 0 0 0 0
B4 1 0 0 0 0
A4
(Letter)
1 1 0 0 0
0 1 0 0 0
B5 0 1 1 0 0
A5 0 0 1 0 0
B6 0 0 1 1 0
A6
0 0 0 1 0
0 0 0 1 1
BC 0 0 0 0 1
(6)
F: Status of Front Cover
B: Status of Back Cover
T: Status of Upper Cover
*When this status value is “1”, it means door open.
H: Hopper Position Sensor (Value “1” means Hopper is in
P: Pointer Detector (Value “1” means Scan-out direction is
R: Retard Position Sensor (Value “1” means Retard
F B T H P R
0 1 0 1 0 0
or
Test again?
Do another Test?
9
Push HOME key once.
(To Section 9.6)
No
Yes
(5)
P: Status of Paper Feed Sensor (x: No range)
W: Status of Waiting Sensor; Range 0-F (F: Darker)
L: Status of Skew (L) Sensor; Range 0-F (F: Darker)
R: Status of Skew (R) Sensor; Range 0-F (F: Darker)
S: Status of Starting Position Sensor; Range 0-F (F: Darker)
J: Status of Jam Sensor; Range 0-F (F: Darker)
E: Status of Ending (Front) Position Sensor; Range 0-F (F: Darker)
e: Status of Ending (Back) Position Sensor; Range 0-F (F: Darker)
1,2,3,4,5 : Each status of Paper Guide Position Sensors 1-5;
P W L R S J E e 1 2 3 4 5
x 1 4 3 2 1 3 3 x x x x x
(x: No range)
home)
upper-front side)
position is released)
(12) No Error or Error Message
(13) No Error or Error Message
To Next Page
Loading...
