Panasonic KV-S2065L - Page 185

Pin No. Signal Name Description
9 +38V +38V
10 +12VS +12V
11 GND Ground
12 GND Ground
CN2008(MOTHER) - Post Imprinter(continued)
CN2009(MOTHER) - CN862(DC-DC CONVERTER)
Pin No. Signal Name Description
1 +5VS +5V
2 -
3 POST DOOR Post Imprinter Door Sensor
4 -
5 GND Ground
CN2011(MOTHER) - CN530(POST IMPRINTER DOOR)
Pin No. Signal Name Description
1 GND Ground
2 GND Ground
3 POINTER Pointer Detector
4 EXIT(REAR) Ending Position Sensor Input
5 JAM(LED) JAM(LED) Output
6 +5V +5V
7 - N.C.
Pin No. Signal Name Description
1 +5V +5V
2 US1 Ultrasonic Waves Input
3 US2 Ground
4 STBY(LED) Waiting LED
5 SKEWL(LED) Skew (L) LED
6 SKEWR(LED) Skew (R) LED
7 GND Ground
8 GND Ground
CN502(RELAY[LOWER]) - CN514(POINTER DETECTOR)
CN503(RELAY[LOWER]) - CN522(WAITING[LED])
Pin No. Signal Name Description
1 +24V(Switched) +24V(Switched)
2
+24V(Switched)
+24V(Switched)
3
GND
Ground
4
GND
Ground
5 +5V +5V(for Digital)
6
+5V
+5V(for Digital)
7 +24V +24V
8 GND Ground
9 +5VA +5V(for Analog)
10 -5VA -5V(for Analog)
11 STB +24V Enable
12 +3.3VOVP +3.3V Over Voltage Detection
Pin No. Signal Name Description
1 SIZE5 Paper Size Sensor5
2 GND Ground
3 SIZE4 Paper Size Sensor4
4 GND Ground
5 SIZE3 Paper Size Sensor3
CN504(RELAY[LOWER]) - CN511(HOPPER POSITION)
Pin No. Signal Name Description
6 +5V +5V
7 SIZE2 Paper Size Sensor2
8 +5V +5V
9 SIZE1 Paper Size Sensor1
10 LEVER Retard Position Sensor
11 DOC Paper Detector
12 HOPPER Hopper Position Sensor
Pin No. Signal Name Description
1 +5V +5V
2 FEED(LED) Starting Position LED Output
3 EXIT(REAR LED) Ending Position (Rear) LED Output
4 GND Ground
5 GND Ground
6 GND Ground
Pin No. Signal Name Description
1 GND Ground
2 AN3 Ending Position (Front) Sensor
3 - N.C.
4 +5V +5V
5 - N.C.
6 - N.C.
CN507(RELAY[UPPER]) - CN529(ENDING[FRONT])
Pin No. Signal Name Description
1 GND Ground
2 EXIT FRONT Ending Position (Front) LED
3 AN5 Paper JAM Sensor Input
4 - N.C.
5 +5V +5V
CN508(RELAY[UPPER]) - CN526(PAPER JAM SENSOR)
Pin No. Signal Name Description
1 US2 Ground
2 US1 Ultrasonic Waves Output
3 SKEW R Skew (R) Sensor Input
4 AN1 Waiting Sensor Input
5 SKEW L Skew (L) Sensor Input
6 AN2 Alternate Output Data Bus2
7 +5V +5V
8 GND Ground
CN509(RELAY[UPPER]) - CN523(STARTING POSITION)
Pin No. Signal Name Description
1 DOC Paper Detector
2 SIZE3 Paper Size Sensor3
3 SIZE1 Paper Size Sensor1
4 SIZE4 Paper Size Sensor4
5 SIZE2 Paper Size Sensor2
6 SIZE5 Paper Size Sensor5
7 +5V +5V
8 GND Ground
CN512(HOPPER POSITION) - CN513(SIZE DETECTOR)
CN505(RELAY[LOWER]) - CN519(STARTING POSITION[LED])