Start-position,activating the Starting Position Sensor, CIS starts to scan the data on the page. And the Back-side
Scanning Start process is same as Front-side Scanning.
6. When the Waiting Sensor detects the end of the first page, the Paper Feed Motor starts to rotate again. As a result,
the second page is passed into the paper feed route. The process to separate the following pages from the second
page is thesame as the first item (3) and (4).
7. When the Waiting Sensor detects the top of the second page, the Paper Feed Motor stops to keep this page between
the Waiting Sensor and Driving Roller 1.
8. When the PC outputs the scanning-start command to scan the second page, The Paper Feed Motor drives the paper
into the paper feed path again.
Step (5) to (8) are repeated for each subsequent paper feed.
9. Front or Back Exit can be selected using the Paper Path Selector.
TOP PREVIOUS NEXT
To Next Page
Loading...
