To Next PageTo Next PageWhat does Panasonic Scanner error F17 mean?
Panasonic Scanner error F17 indicates an On Board RAM Error. The suggested solution is to replace the SCSI Board. Alternatively, replacing the MAIN CONTROL Board or the MOTHER Board might resolve the problem.
What does error F18 mean on a Panasonic KV-S2065L?
Error F18 on your Panasonic Scanner indicates a DIMM Error. The suggested solution is to replace the DIMM. Alternatively, replacing the SCSI Board, the MOTHER Board, or the MAIN CONTROL Board might resolve the problem.
What should I do if my Panasonic Scanner has a Back Side Lamp Lighting Error?
If your Panasonic scanner displays a Back Side Lamp Lighting Error (F69), start by checking the CIS ( B ) Cable and the CIS ( B ) LED Cable. If the problem continues, you may need to replace the Back Side Image Sensor, the DRIVE Board, the MOTHER Board, or the MAIN CONTROL Board.
What does error F63 mean on a Panasonic KV-S2065L Scanner?
If your Panasonic Scanner displays error F63, it indicates a Back Side Black Level Error. The suggested solution is to replace the MAIN CONTROL Board.
What is error F20 on a Panasonic KV-S2065L Scanner?
If your Panasonic Scanner displays error F20, it indicates a Shading RAM Error. The suggested solution is to replace the MAIN CONTROL Board.
How to troubleshoot a Waiting Sensor Error on a Panasonic KV-S2065L Scanner?
If your Panasonic Scanner displays a Waiting Sensor Error, it might be due to dust on the LED of the WAITING LED Board or on the light receptor of the WAITING SENSOR Board; try removing any dust. Ensure that the LED on the WAITING LED Board, the light receptor on the WAITING SENSOR Board, and the slot location on the carrier board are properly aligned. Check the WAITING LED Board Cable, the RELAY (LOWER) Board Cable, the Waiting Sensor Cable, and the RELAY (UPPER) Board Cable. If issues continue, consider replacing the WAITING LED Board, the WAITING SENSOR Board, the RELAY (LOWER) Board, the RELAY (UPPER) Board, the MOTHER Board, or the MAIN CONTROL Board.
What does Double Feed Detector Error mean on Panasonic KV-S2065L?
A Double Feed Detector Error (F80) on your Panasonic scanner indicates a potential issue with the paper feeding mechanism. Start by removing any dust on the Supersonic Receiver on the WAITING LED Board, or on Supersonic Generator on the WAITING SENSOR Board. Also, check that the Supersonic Receiver on the WAITING LED Board, Supersonic Generator on the WAITING SENSOR Board. Check the WAITING LED Board Cable, the RELAY ( LOWER ) Board Cable, the Waiting Sensor Cable, the RELAY ( UPPER ) Board Cable and the Starting Position Sensor Cable. If the issue persists, you may need to replace the WAITING LED Board, the WAITING SENSOR Board, RELAY ( LOWER ) Board, RELAY ( UPPER ) Board, the MOTHER Board, the MAIN CONTROL Board or the STARTING POSITION SENSOR Board.
How to fix a Size Detector Error on a Panasonic KV-S2065L Scanner?
To address a Size Detector Error (F70) on your Panasonic scanner, begin by checking the Hopper Extension Tray Rack. Then, inspect the SIZE DETECTOR Board Cable, the HOPPER POSITION Board Cable, and the RELAY ( LOWER ) Board Cable. If the error continues, you might need to replace the SIZE DETECTOR Board, the HOPPER POSITION Board, the RELAY ( LOWER ) Board, the MOTHER Board, or the MAIN CONTROL Board.
What causes a Hopper Drive Error on a Panasonic KV-S2065L?
A Hopper Drive Error (F40) on your Panasonic scanner could stem from several issues. Start by checking the Hopper Position Cable and the RELAY ( LOWER ) Board Cable. Also, inspect the gears in the Hopper Drive for any obstructions or damage. If the problem persists, you may need to replace the HOPPER POSITION Board, the RELAY ( LOWER ) Board, the MOTHER Board, the MAIN CONTROL Board, or the DRIVE Board.
How do I fix an Ending (Front) Position Sensor Error on my Panasonic Scanner?
To resolve an Ending (Front) Position Sensor Error (F55) on your Panasonic scanner, first, remove any dust on the LED on the ENDING (FRONT) LED Board, or on the light receptor on the ENDING (FRONT) SENSOR Board. Also, check that the LED on the ENDING (FRONT) LED Board, the light receptor on the ENDING (FRONT) SENSOR Board and the slot location on the carrier board are properly aligned. Check the ENDING (FRONT) LED Board Cable, the Paper Jam Sensor Cable, the Ending (Front) Sensor Cable and the RELAY ( UPPER ) Board Cable. If the error remains, consider replacing the ENDING (FRONT) LED Board, the PAPER JAM SENSOR Board, the ENDING (FRONT) SENSOR Board, the RELAY ( UPPER ) Board, the MOTHER Board, or the MAIN CONTROL Board.
General