Panasonic KX-TCD725EM

14
Making Calls
To redial the last number dialled
Press then or .
OR
Press or then .
• The last number dialled is automatically
redialled.
To redial with the redial list
1 Press .
• The last number dialled is displayed.
2 Press or until the arrow points to
the phone number you desire to call.
• To exit the redial list, press .
3 Press or .
• The selected number is automatically
redialled.
To clear a phone number in the
redial list
1 Press .
• The last number dialled is displayed.
1 Enter a phone number.
• The entered number is displayed.
• To cancel, press and hold (C) or press
.
2 Press .
• “ ” is displayed.
• After a few seconds, the display will start
showing the length of the call.
3 Press or place the handset on the
base unit to hang up.
• The handset will return to the standby
mode.
2 Press or until the phone number you
desire to clear is displayed, then press .
• To exit the redial list, press .
3 Press or until the arrow points
to “
Clear ”, then press .
4 Press or to select “ YES ”, then
press .
• “ CLEARED ” is displayed.
To clear all phone numbers in
the redial list
1 Press then .
2 Press or until the arrow points
to “
All Clear ”, then press .
3 Press or to select “ YES ”, then
press .
• “ CLEARED ” is displayed.
• “ No Stored Memory ” is displayed.
For basic making a call operation, see page 12.
Making a Call after Confirming the Entered Phone Number
Make sure that the power is ON (p. 12), and the unit is in the standby mode.
Redial Call
The unit automatically stores the last 10 dialled phone numbers into redial list. If the redial list is empty, “ No
Stored Memory
” is displayed when you press . If you press then for redial call and
the other party is in busy, the unit will call back automatically.
Make sure that the power is ON (p. 12), and the unit is in the standby mode.
KX-TCD725EM-1(02~23) 01.7.19 10:25 PM Page 14